Nanofader
From skratchtek
Revision as of 11:27, 1 February 2016 by 94.10.60.76 (Talk) (Created page with "=Introduction= The Nanofader is an open-source active scratch mixer which is designed to be as simple and cheap as possible. It uses standard jellybean Wikipedia:4000 serie...")
Introduction
The Nanofader is an open-source active scratch mixer which is designed to be as simple and cheap as possible. It uses standard jellybean CMOS chips rather than expensive specialised VCAs, and can easily be assembled on a prototype board if needed.
It was originally created to allow high-quality faders to be used with portable turntables such as the Numark PT-01, but the same circuit could be adapted to a number of different uses.
