Crossfader circuit

From skratchtek
Revision as of 20:00, 31 January 2016 by Rasteri (Talk | contribs)

Jump to: navigation, search

CrossfaderCircuit1.svg

Mixer requirements

Turntablists have the following requirements in a mixer circuit:

  • Small off-to-on travel distance - the appropriate channel should be fully muted when the fader is in the zero position, and bring the channel to full volume within the first few millimetres of wiper travel.
  • Decay time - when the fader is moved, the appropriate channel should change volume at a rate quickly enough to allow rhythmic cutting, but slowly enough to eliminate any clicks and pops which would be caused by an instantaneous decay