Difference between revisions of "Crossfader circuit"

From skratchtek
Jump to: navigation, search
(Created page with "Requirements for a turntablist crossfader control circuit * '''Small off-to-on travel distance''' - the appropriate channel should be fully muted when the fader is in the zer...")
 
Line 1: Line 1:
 
Requirements for a turntablist crossfader control circuit
 
Requirements for a turntablist crossfader control circuit
  
* '''Small off-to-on travel distance''' - the appropriate channel should be fully muted when the fader is in the zero position, and bring the channel to full volume within the first 5mm of wiper travel.
+
* '''Small off-to-on travel distance''' - the appropriate channel should be fully muted when the fader is in the zero position, and bring the channel to full volume within the first few millimetres of wiper travel.
 +
* '''Decay time''' - when the fader is moved, the appropriate channel should change volume at a rate quickly enough to allow rhythmic cutting, but slowly enough to eliminate any clicks and pops which would be caused by an instantaneous decay

Revision as of 14:41, 31 January 2016

Requirements for a turntablist crossfader control circuit

  • Small off-to-on travel distance - the appropriate channel should be fully muted when the fader is in the zero position, and bring the channel to full volume within the first few millimetres of wiper travel.
  • Decay time - when the fader is moved, the appropriate channel should change volume at a rate quickly enough to allow rhythmic cutting, but slowly enough to eliminate any clicks and pops which would be caused by an instantaneous decay