Difference between revisions of "Crossfader circuit"
From skratchtek
(Created page with "Requirements for a turntablist crossfader control circuit * '''Small off-to-on travel distance''' - the appropriate channel should be fully muted when the fader is in the zer...") |
|||
| Line 1: | Line 1: | ||
Requirements for a turntablist crossfader control circuit | Requirements for a turntablist crossfader control circuit | ||
| − | * '''Small off-to-on travel distance''' - the appropriate channel should be fully muted when the fader is in the zero position, and bring the channel to full volume within the first | + | * '''Small off-to-on travel distance''' - the appropriate channel should be fully muted when the fader is in the zero position, and bring the channel to full volume within the first few millimetres of wiper travel. |
| + | * '''Decay time''' - when the fader is moved, the appropriate channel should change volume at a rate quickly enough to allow rhythmic cutting, but slowly enough to eliminate any clicks and pops which would be caused by an instantaneous decay | ||
Revision as of 13:41, 31 January 2016
Requirements for a turntablist crossfader control circuit
- Small off-to-on travel distance - the appropriate channel should be fully muted when the fader is in the zero position, and bring the channel to full volume within the first few millimetres of wiper travel.
- Decay time - when the fader is moved, the appropriate channel should change volume at a rate quickly enough to allow rhythmic cutting, but slowly enough to eliminate any clicks and pops which would be caused by an instantaneous decay
