|
|
| (8 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | ==Firmware install instructions==
| |
| | | | |
| − | To upgrade your SC1000 firmware:
| |
| − |
| |
| − | * Download [http://rasteri.com/sc03rc5.zip THIS FILE], and unzip it to the root of a USB stick.
| |
| − | * Put the usb stick in your SC1000 and turn it on, making sure it's plugged into speakers and/or headphones
| |
| − | * After 20 seconds or so, you should hear a message explaining that your SC1000 has been updated.
| |
| − | * Turn your SC1000 off and on again
| |
| − |
| |
| − | You should now be running the latest version of both the operating system and the software.
| |
| − |
| |
| − |
| |
| − | ==How to check what version you are running==
| |
| − |
| |
| − | * Turn your SC1000 off
| |
| − | * Turn your beats volume up, samples volume down
| |
| − | * Press and hold ANY track select button on the back of the SC (doesn't matter which)
| |
| − | * Turn your SC1000 back on, keeping the button held
| |
| − | * You will eventually hear a message telling you your operating system version.
| |
| − |
| |
| − | Turn the beats volume down and your samples volume up to hear the software version.
| |
| − |
| |
| − |
| |
| − | ==MIDI stuff==
| |
| − |
| |
| − | You can now connect USB MIDI devices to the SC1000. You'll need a USB hub to be able to connect both your USB stick and USB MIDI device at the same time.
| |
| − |
| |
| − | You should be able to use any class-compliant MIDI device.
| |
| − |
| |
| − | The default MIDI mapping is :
| |
| − |
| |
| − | * '''Channels 1 & 2'''
| |
| − | ** '''Notes''' - Cue points for beats (CH1) and samples (CH2). There are 128 cue points, one for each MIDI note.
| |
| − | ** '''Pitch Bend''' - Pitch bend for beats and samples respectively
| |
| − | * '''Channels 3 & 4'''
| |
| − | ** '''Notes''' - musical pitch shifting (like a Controller One/PDX3000). Middle C (Note 60) is 0% pitch.
| |
| − | * '''Channel 5'''
| |
| − | ** '''Note numbers 0 (C-1) & 1 (C#-1)''' - Start/stop for beats (0) and samples (1)
| |
| − | ** '''Note number 127 (G9)''' - Shift button (to delete cue points)
| |
| − |
| |
| − | You can define your own MIDI mapping by editing scsettings.txt.
| |
| − |
| |
| − |
| |
| − | I have made a lemur preset
| |
